Oscillating Textile Washing Machine for blanket after dyeing and printing

Oscillating Textile Washing Machine for blanket after dyeing and printing

LMH694 Oscillating washing machine

Application:

This machine is suitable for washing purpose of cotton, chemical fiber and blended fabric after printing and dyeing. Particularly suitable for printing, dyeing of Rachel blanket, acrylic blanket, cotton blanket, towel and other heavy fabric after washing.

Main specifications

Type: left hand or right hand

Nominal width: 1800,2000,2200,2400mm

Working speed: 5-30 m/min

Oscillating manner: on time oscillation and rotary drum oscillation.

Driving manner: AC convertor multi unit sync driving.

Installed power: 68kw

Outer dimensions: 16990×(W+2800) ×2800mm

Oscillating & washing combined machine packing list.

1   open centering inlet feeding

2   dip tank two upper two lower, upper and lower cloth guiding rollers’ diameter are Φ125, shafts heads are made by stainless steel

The upper bearing is UCP207 textile bearings, lower bearing is specially made with no types number, built-in graphite insert ring (the diameter of shaft hole is 35 mm)

3 MH691-260 2 roller squeezer, driving roller diameter isΦ250

The rubber hardness of the driving roller is 90º,  the rubber hardness of the driven roller is 82º-85º.

2 end bearing of the roller: 3612, frame, oil sealingΦ60×Φ90×12(1pcs),Φ100×Φ75×12(4pcs),

Pressing pneumatic cylinderΦ160×70, the clip ring for the roller end bearing isΦ60

Motor speed-reducer:BWD13-15-4KW cycloidal pin gear speed reducer

4   Speed adjusting up-low lifter

UCP207 high foot textile machinery

bearing seat, a cloth guiding roller diameter Φ125, penumatic cylinder MP2-63 * 150, single ear in tail ring type, FJZ-X angle sensor.

5   MH502-260MH502-260 open mouth stainless steel tank, the bearing seat of the upper and lower guiding roller are the same of the small dip tank

6    round drum oscillating tank

Oscillating roller out diameter Φ350, surface Φ12 hole punch, two ends sealing Φ65 (zhejiang jiashan minhua sealing tech Co.,Ltd )  shaft end bearing seat are the same as the guiding roller of the small dip tank. Motor speed-reducer:BWD13-23-4KW cycloidal pin gear speed reducer

7   Incircle of Octagon rollerΦ350, mechanical sealingΦ65, production site is the same as the round drum oscillating tank.

Upper and lower guiding roller diameterΦ125, upper guiding roller bearing UCP207, lower guiding roller are the same as small dip tank

       Motor speed-reducer: BWD13-23-4KW

8  Upper and lower squeezer roller, diameter isΦ350

The rubber hardness of the driving roller is 90º,  the rubber hardness of the driven roller is 82º-85º.

2 ends bearing of the roller: 3612, frame, oil sealingΦ90*120*12,Φ105*Φ130*12(4pcs),

Motor speed-reducer: BWD14-23-7.5KW(4 polars) cycloidal pin gear speed reducer

Press pneumatic cylinder is Φ200,clip spring of shaft is Φ90

9    fiber storage

  Fiber storage frame diaΦ200,UCP208 bearing seat of textile machinery

Motor speed-reducer: BWD11-11-1.5KW.