Double burner Cotton Fabric Singeing Machine for both knit fabric and woven fabric

Double burner Cotton Fabric Singeing Machine for both knit fabric and woven fabric​

Application:

This machine is special for singeing the 100% cotton,hemp and other blended fabric to remove impurity and villous of fabric surface.

Main technical parameter:

1. Machine roller surface width: 2000mm

2. Machine back side: based on client’s request

3. Machine speed: 15~110m/min

4. Heat source: LPG or natural gas

5. In the singeing box there are 4 burners (gas injection type flame),in the top equipped with exhaust fan.

6. In the singeing box, the burner will automatic come down when the machine speed is lower than set value.

7. Burner ignition: electronic control manual ignition.

8. Extinguishing type: steam and nip dual ignition.

9. Output device: rolling output.

10. Transmission model: AC frequency conversion synchronous regulating speed transmission.

11. Installed power: about 15KW.

Main structure feature:

• Entry device

Feeding frame made of edge fold steel plate, equipped with fabric tighten device,guide roller,selvedge guider etc.

• Brushing box

Composed of two pcs of palm fibre brushing rollers, 2 pcs of rubber roller, equipped with dust absorption and filter.

• Singeing box

Four burners singeing, passing cloth can achieve two positive two negative, the angle of burners burning each other or cutting burning can be manual regulated.

• Two rollers squeezer

Nominal pressure is 3 ton, single squeezing point, underneath compression, upper roller is steel roller, and frequency converter drives geared motor, steel roller dia. Is 225mm, coated with stainless steel plate. Lower roller is rubber roller; diameter is 250mm, NBR. Upper and lower squeezing roller body is seamless steel tube. Transmission power is 3 kw.

• Output device

Rack is steel plate folded plate structure; output device is package output, single motor drives.

Rack of the whole machine made of Channel steel 314